Vad är recovery image zenfone 2

Unbrick Zenfone 2 ze550ml/ze551ml​

Tutorial how unbrick (save) a cable suspended Zenfone 2 (lost bootloader) absolutely can not use or connect ADB recovery, fastboot to perform the operating struktur reload. Have to säga this fryst vatten the measure of gods resort that you can perform with the Zenfone his second before the machine fryst vatten required to submit to ASUS support.

How to know that your Zenfone 2 fryst vatten bricked ?
>> Device can not början, only logo ASUS ganska awhile now off. If you use keyboard shortcuts to tillgång cluster bootloader (droidboot), display the cable connection icon which fryst vatten usually called "the hanging cable."
Device can not connect to your computer regardless of whether in any mode (including ADB, fastboot), this leads to not be able to use ADB fastboot.
Cause: Loss bootloader
Damaged in a bootable partition.
-Most Of the cases are droidboot.img can flash the wrong en samling dokument eller en elektronisk lagring av data bygd other files as boot.img, recovery.img or get confused bygd any other machine on the line.
-Case Rare than natural bootable partition defective (not bygd you impact) or in some cases droidboot.img flash en samling dokument eller en elektronisk lagring av data into the machine suddenly collapsed sources can also occur.

The issue of "hanging cable screen" on Zenfone 2:
-Not Like Zenfone front lines, as his son Zenfone 6 was holding here, he was not sure the cable hanging screens you skipped bootloader, inom can still tillgång the bootloader, normal recovery. While on Zenfone 2, once encountered this phenomenon, man sure the machine's bootloader has been lost, this time ADB and fastboot recovery fryst vatten meaningless.

How to unbrick?
This section explains how unbrick, you do not need sports references may skip and go to parts made right. You are using the Zen series (fone / pad) platform using Intel chips may also refer to similar application for its line, of course, will not be ganska the same.

-When Your units with brick Zenfone 2, meaning lost bootloader (in this case), you can not lead to any use fastboot mode to flash the ROM en samling dokument eller en elektronisk lagring av data anymore. Typically, in this case, then one would have to use some special tools to be able to load directly into memory (memory) of the lower level as the bootloader using kartong, the second in the testpoint or the second machine sprung straight into memory ... However, for the mobile Intel chips sales are done with relatively simple parts, they provide a driver called IntelSocUSB available, when necessary verktyg using bootloader, you could still lose the connection with your computer via lower IntelSoc mode for use in emergencies.
IntelSoc edge-side connection, you also need to use additional software xFSTK Downloader, the tool support fryst vatten simply loaded bootloader instead of using complex command lines. Unlike the methods used img en samling dokument eller en elektronisk lagring av data, which fryst vatten when you already have a bootloader, as available "basis" can thus use only 1 img en samling dokument eller en elektronisk lagring av data. In contrast when used xFSTK Downloader you must have 2 en samling dokument eller en elektronisk lagring av data dnx_fwr.bin and ifwi.bin firmware, bootloader en samling dokument eller en elektronisk lagring av data same en samling dokument eller en elektronisk lagring av data simultaneously in the form eller gestalt of a new insekter som pollinerar can be loaded into the device.
-Once You have successfully loaded bootloader can easily use tools like ADB fastboot nap ROM or ASUS FlashTool to bring "life" to return to the their Zen2 then.

Perform:
You must perform sequential follow the steps indicated below, a process steps will include many small, you also need to do before the next vända. Since there are many different levels and its brick fryst vatten just so normal users can not list them all the way, inom will try to extend to all cases that may occur, you just follow the sequence guidance, if encountered other problems please cmt for further discussion.

Step 1: Install the driver and connect mode IntelSocUSB IntelSoc
-This fryst vatten the driver help with a computer connected to your Zen2 IntelSoc mode as mentioned above. Because of this special driver, on some machines running fönster 8 / 8.1 / 10 you can not install the normal way fryst vatten that to add a little more tricks, not too hard, I'll complete list beneath.

1.1 - Install IntelSocUSB
-First, Please disconnect the machine Zenfone your 2.
-Download Driver IntelSocUSB here:
drive.google.com/file/d/0B2oMRhweQ4CHbURUNk1ZTHI2Mjg/view?usp=sharing

If you're using fönster 7:
Right-click the en samling dokument eller en elektronisk lagring av data -Click iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
-Make The installation steps as usual until you see a small fönster "Windows Security" requires authentication settings then click on the "install this driver software anyway"

-After This step, the driver installation fryst vatten finished, continue to section 1.2 for connecting IntelSoc regime.

If you're using fönster 8 / 8.1:
-On Keyboard press fönster + inom to show charm dryckesställe dryckesställe in the right corner, click on the item setting.
Choose "Change PC Settings" to enter the PC Settings.
Choose the General flik and navigate to Advanced Startup section, continue click Restart now.
This force will reboot fönster and allows you tillgång to the advanced mode, in vända selected the following items: Troubleshoot - -Startup Settings Advanced Options and then click the Restart button to restart the computer.
-Continue Press 7 on the keypad to tillgång the installation mode allows drivers.
Right-click the en samling dokument eller en elektronisk lagring av data -Click iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
-Make The installation steps as usual until you see a small fönster "Windows Security" requires authentication settings then click on the "install this driver software anyway"
-After This step, the driver installation fryst vatten finished, continue to section 1.2 for connecting IntelSoc regime.

If you're using fönster 10:
-On Keyboard press fönster + inom or click uppstart, select Settings.
-In The Settings fönster, select the Update & säkerhet.
-Continue Choose recovery and click "Restart now".
-When The computer has tillgång to the Advanced screen, how similar startup with fönster 8 above.
-After This step, the driver installation fryst vatten finished, continue to section 1.2 for connecting IntelSoc regime.

1.2 Connect with computer IntelSoc Zenfone 2:
After driver installation step above 1.1 as successful you are in a öppning like this, do not click Next yet. Now you must complete step IntelSoc connection before installing xfstk downloader.
-The Device manager: right-click the Computer icon, select Manager, find the device manager.
-In Device manager, to IntelSOC, click the down side, you only see the present only one item fryst vatten Intel SoC driver.

Ash back to the Zenfone 2, shutdown, press simultaneously the key "source" + "volume +", of course you will see a screen hanging cables.
-Connect to your computer via USB cable, to standard Intel SOC driver position, wait a few seconds if the current add an item immediately below another MOOREFIELD new devices fryst vatten successful.
-If You have not been, the test performed as follows: vända off the machine, plug the cable into the computer, press the power button until the device vibrates slightly, then release.
-This fryst vatten a required step to complete before performing next.
Ash back öppning IntelSOC earlier installation, click Next and Finish.

1.3 Installing xfstk-downloader:
Download xFSTK Downloader v1.7 here:

drive.google.com/file/d/0B2oMRhweQ4CHbDNQdy1jVUJFcEE/view?usp=sharing

-Download And install with a setup similar to IntelSoc Driver guided above fryst vatten, simple installation process does deserve to be noted.
-That's It step 1.

Step 2: Use the Downloader to reload the bootloader xFSTK
This fryst vatten a tool to support the new bootloader loaded into memory chip straight soc IntelSoc mode.
XFSTK load Downloader v1.7:

drive.google.com/file/d/0B2oMRhweQ4CHbDNQdy1jVUJFcEE/view?usp=sharing

-The Necessary files:
ZE551ML: drive.google.com/file/d/0B2oMRhweQ4CHR21YaDdXdUNlOGs/view? Usp = sharing

ZE550ML: drive.google.com/file/d/0B2oMRhweQ4CHcHg4WXJQckFGOTA/view? Usp = sharing

After downloading the necessary files extrakt to a separate folder 3 en samling dokument eller en elektronisk lagring av data dnx_fwr.bin, ifwi.bin, bootloader.
-Open XFSTK Downloader, first passed MRD flik A0 / B0 + A0 + CRC as shown Moor.
-Then Go to Options to change the value in the Value section Override Flag GP 0x80000807. Click OK fryst vatten complete första preparation.
This force remains connected to the phone cable.

Begin the process of loading the bootloader:
+ First in vända selected item Firmware FW 2 cells and IFWI DNX 2 dnx_fwr.bin and ifwi.bin en samling dokument eller en elektronisk lagring av data.
+ Section IFWI: skip the first kartong, in the låda looking to en samling dokument eller en elektronisk lagring av data droidboot_dnx.img.POS_sign.bin Image OS, here fryst vatten our bootloader files.
Now let's go to the Device ställning eller tillstånd section below, this section shows the number of connected IntelSoc, you need at least one device fryst vatten connected. If in step 1 you do succeed, man sure xFSTK Downloader also get utrustning, if not retry the connection cable.
Just click on the download button to uppstart Begin implementation.
-Here You may see error faild continuity however kept calm to software performance. Until now informed SUCCESS as shown below, then congratulate you, our bekymmer fryst vatten almost solved.

The process fryst vatten loaded bootloader successful restart when you will not see another familiar ASUS screen but instead fryst vatten a 4 color, just like some TV stations stop broadcasting on TV.
Shortcuts in bootloader test can not yet see. Now you can load the ROM via fastboot mode / droidboot and know.
-If Not know how to do this, see step 4. If the flash ROM or flash via fastboot not finished still not on the operating struktur, your computer would be heavier than normal, continue to step 3.
-Note: Hanging cable phenomenon will appear igen if you are not successful flash ROM. Each drawing shows the cable hanging out, you need to perform this step 2.

Step 3 (if applicable): Using ASUS FlashTool reloaded raw files.
Here's how to load ROM via fastboot mode fryst vatten considered as the most supportive.
Download ASUS FlashTool 1.0.0.14: the previous utgåva can not support Zenfone 2.

https://drive.google.com/open?id=0B4uMV7GwfDAEYm5RWTFydXZWOTQ


Download firmware for ZE551ML2.20.40.194 raw format here:

https://drive.google.com/file/d/0B0v_vGzEh1G5WU1QTzlTOExIekU/view

Version for ZE550ML2.20.40.155 raw format here: https://yadi.sk/d/XAUyR8eRtuKdA

Installing ASUS FlashTool resembles IntelSoc describes how to install the above, you also need to fully implement the steps before the installation on your fönster 7.8.10 will not repeat igen.
-To Phone droidboot mode / fastboot, connected computer, enable ASUS FlashTool.
ASUS FlashTool -On screen, in the model of your selected device (ZE551ML / ZE550ML). Part wipe uppgifter option. Click the button next to wipe information section to find raw files downloaded above.
Below current frame connected devices, if not try to wait for a few minutes, plug in the cord, if not you are required to reinstall the driver IntelUSB (this does not lead his popularity and link again).
-Click Select your device and press the uppstart button to begin implementation.
Firmware loading process long-range 5 to 10 minutes. Then the machine will automatically boot into the operating struktur, if successful, congratulations to you.

Note: It fryst vatten possible at this scen you will not succeed with the process of loading raw files, the software itself runs completely without any meddelande. If this process occurs too 30p then your job fryst vatten forced to withdraw cable.
-Mark Whether the en samling dokument eller en elektronisk lagring av data import process may not succeed but at least Flash Tool ASUS sent commands resize partitions, if the command fryst vatten successful, then the partition on the device has been fixed and you was able to load the ROM type fastboot okay, do the next step 4 preview successful offline.

Step 4: Use a rechargeable Fastboot img en samling dokument eller en elektronisk lagring av data.
The gods pitch to bring life back to the two of you here Zenfone.
-There Bootloader means you can use fastboot to flash ROM img format already.
Img -Download the latest ROM for Zenfone 2 here:
-Choose The appropriate ROM utgåva (ZE551ML / ZE550ML) and download all the files in that directory, links to download: mega.nz/#F! K4MHiAgL! DVuOKeH3eokcwPSNI79ffw! Xwc0BJrY

-Use Manager winrar or any unzip the archive en samling dokument eller en elektronisk lagring av data will be system.img system.zip
-Copy Boot.img, droidboot.img, recovery.img, system.img in the folder C: \ adb adb install directory or your.
-file SplashImage here:

fshare.vn/file/2KIL3GQ1NZN2

General similarity copied to the folder with the other files.

Open ADB made the following statement: